Home » Categories » Solutions by Business Process » Order Processing and Invoicer » Sales Order Processing / Telesales

Stock Picking Sheet

Datafile Software

Stock Picking Sheet

Once you have entered orders onto the system, you may want to print a "stock picking sheet” to give to the warehouse so that the goods can be pulled from the shelves or bins preparatory to being despatched.

In some circumstances a report is perfectly adequate for this, and this present option gives this to you. In other circumstances you may need to give some thought to how best to supply the information to the warehouse. If it is easier to pick each order individually, then perhaps you need to define an acknowledgement or delivery note document for the purpose.

The procedure for printing the order processing reports is exactly the same in each case. Choose the report you wish to run and you will be presented with the print options.

To amend one of the options use the mouse to click the input required and amend, otherwise confirm the PRINT option to print the report, or click the OPTIONS button to configure the report print (page size / margins / font).

Date of Report

You would normally print today’s date on the report. Today’s date is displayed here.

Report ‘As At’ Date

The ‘date of report’ represents the date the report actually printed, the ‘as at’ date reports the date up to which the data represents. When reporting on the product file this is unlikely to be any different from the report date as there is no ‘value’ information recorded. It is more common to use this option on other ledgers to indicate the date up to which transactions have been entered for.

Exclude F-forward Orders

You are unlikely to want to include F-Forward Status on reports such as the ‘Stock Picking Sheet’ so select this option to exclude.

Specify Any Selection Criteria

This option allows you to filter products on the report – you may for example only want to include products containing ‘chair’ within the description for example. Selecting this option gives you the ability to enter up to six lines of criteria.

The OPTIONS Button

When you select to print an application report an OPTIONS button is available alongside the PRINT/CANCEL buttons. Selecting the OPTIONS button allows access to the print configuration.

The layout of this screen differs slightly based on whether you have set the page size (as above) or not.Before discussing the parameters you should note the buttons available at the footer of this parameter screen.

This option updates the individual parameters from your user default when they are set, overwriting presets where applicable. If no user defaults are set then this option is ‘greyed’ out and cannot be selected. To set user defaults see the appropriate section below.

This option accepts your entered parameters for this print only, reverting to defaults next time the report is run.

Depending on whether the user is configured as an ‘Install’ user then the next option will be SAVE. This saves your set parameters so they are offered as default next time this report is run (Note: this is system wide not per user). Setting the user as an ‘Install’ user is achieved through the user configuration available under the MASTER sign-on.

This option abandons any changes made and returns you to the report screen.

The report parameters available are:

Paper Size – select the paper size the report is to be printed to (i.e. A4).You can elect to leave this blank in which case the report is printed as per the last/default page size of the printer, however, if you do this you can only choose fixed pitch fonts – selecting a page size is mandatory to use proportional fonts. If you set a page size then the options screen re-displays with the appropriate parameters. If you leave blank then the options screen remains as above.

Default Printer Font – a font dialog is display allowing you to select as required, the default font to be used for this report. If you’ve sent the page size then all fonts are available, if you haven’t set this then only fixed pitch fonts can be assigned. You can also set bold/italic attributes and font size – note that if you haven’t set a page size then the font size option is not applicable (font is sized as per previous rules)

Selecting the Font Size

Generally you can’t go far wrong with 10point.However, if you have a lot of data items on your report, and are printing in portrait, 10point may be too big to fit all the required information without overlapping fields.

The positioning of fields across the page is determined by the item size. If you imagine the Stock Picking Sheet report this shows, by default, the order reference (10 characters), the account code (10), the stock code (16), the order quantity (10), the goods value (14) and the outstanding delivery quantity (14). Together with spaces between the items this gives a total of 89 characters, or columns required, across the page (think graph paper – you have 89 ‘cells’ across the page).

Those 89 columns are split equally across the available page (page size and margins taken into account) as starting positions for data items – so the order reference starts at column 1, the account code at column 12 (order reference plus 1), etc. If you select a font size too big then the order reference may not finish printing before the account code starts causing the account code to overlap the end of the order reference. If this occurs then you may need to either reduce the font size or consider swapping the report to landscape orientation if the font size would go too small.

Default to Landscape – set the printed report to landscape, leave blank for usual portrait orientation. You may want to set reports such as the Sales Ledger Aged Debtors Report or the Cashbook Receipts Analysis Listing to landscape as these reports require a large amount of detail to be printed and otherwise the font size could be too small.

Show Time in Report Headings – set to include the printed time in the report headings in addition to the printed date.

Include Selection Criteria – set to print any selection criteria that were applied to the report.

Email as Text – if send this report via email this option allows you to send as a text file attachment as opposed to, if left blank, PDF.

Omit Full Page Headings – When printing a multi-page report the system repeats the headings for each page. Setting this option reduces the heading details for the second and subsequent pages allowing more record detail to be printed per page.

Default Output to Spooler – Usually, when printing a report, the default printer is the last print device used. Select this option to set the default printer as the spooler for this report. This acts only as a default and doesn’t prevent you electing to print the report instead.

Allow Change of Printer Alias – when these options are configured then it is assumed you are printing as ‘direct windows print’ and this is the alias set by default. Setting this option allows you to change the default alias at run-time to one of the list of Datafile configured printers. If you change the alias to a ‘DOS’ style alias then the page size (length/width) and font are again picked up from the Print Style Profile, although other settings such as ‘include time’ etc. remain from the OPTIONS display.

Print Negatives in Red – on selected reports, assuming you have a colour printer, it may be useful to print negative values in red. This option allows this.

The next set of parameters allows you to specify formatting and margin settings. This section is different if you set the page size earlier.If you have set the page size then you set the margins in millimetres. If you haven’t set the page size then you set margin in ‘columns’ for both portrait and landscape - the appropriate settings being used based on the orientation of the output selected at run-time.

Paper Size Set

Characters Per Line – the system displays the width of the report items on the right. If you leave this value at 0 (recommended) then the report width used in determining the start column positions of data items (as discussed above with regards to font size) is the larger of either the report print items or 80 columns.You can manually set a report width – from 64 to 255 columns. You may want to increase the number of columns on (say) a landscape report with few print items to bring the fields closer together to aid in reading.

Lines Per Page – if left at 0 (recommended) then the number of lines per page is determined by the font and page size. Alternatively you can set a number of lines per page, perhaps to give a greater gap between rows of data items.

Left Margin (mm) – set the size of the left-hand margin (relative to page orientation in millimetres.

Right Margin (mm) – set the size of the right hand margin.

Top Margin (mm) – set the size of the top margin.

Bottom Margin (mm) – set the size of the bottom margin.

Paper Size Not Set

Minimum Characters Per Line – the system displays the width of the report items to the right. If you leave this value as 0 then the report width is the larger of either the report print items or 80 characters. You can manually set a report width – from 64 to 255 characters wide – but if you set a width less than the items actually printed then this is overridden by the report width at run-time.

Maximum Lines Per Page – if left at 0 then, when printing a report, the system will determine the number of lines per page based on the report width and the printable area of the page up to a maximum of 72 lines per page in portrait mode or 50 lines per page in landscape mode. Alternatively you can set the number of lines per page, from 16 to 255, and this is then taken into account when deciding font size to ensure that number of lines is printed. If left at 0 then when sending to the spooler the lines per page is assumed to be 72 in portrait mode and 50 in landscape. If you require an identical print from the printer and the spooler then a maximum number of lines should be set.

Left Margin – set the number of characters to be used as a margin from 1 to 64.If you require a margin then when entering the value you need to take into account the report print width – a margin of 4 characters on an 80-character report will be bigger than a margin of 4 characters on a 132-character report. If left at 0 no left margin is applied.

Right Margin – if you require a margin to be applied on the right of the report set the number of characters accordingly (again 1-64), if leave as 0 then no right margin is applied.

Top Margin – set the number of lines to leave as a margin at the top of the page (1-32 lines). If left at 0 then no top margin is applied.

Bottom Margin – set the number of lines to leave as a margin at the bottom of the page (1-32 lines). If left at 0 then no bottom margin is applied.

Finally, you can set default options that are used when you send the report to print or e-mail.

Print Device – if using a stand-alone Datafile system then you can set a default printer to output to. This option only applies when sending to a print device; if last printer was spooler or fax then this remains the default. If using a networked Datafile system then you can still set this where you are printing to a networked printer – provided all terminals have a consistent device path. If the print device isn’t valid then the normal printer is offered instead.

E-mail Address – if the report is sent to email then here you can enter an email address that is to be used by default for this report – though it can be amended at run-time.

Once you’ve set the desired parameters select the ACCEPT option to apply the settings for this print or, if available, the SAVE option to apply for this and future prints.

Custom Fields
  • Release ID: Standard
Attachments Attachments
There are no attachments for this article.
Related Articles RSS Feed
Abandon Delivery if Insufficient Stock (SOP Only)
Viewed 1278 times since Fri, Jun 8, 2012
Extra File Scans
Viewed 1286 times since Wed, Jul 4, 2012
Flag User-ID, Date and Time to Order Detail on Document Production
Viewed 1926 times since Wed, Jun 13, 2012
Reports and Analysis - Application User Facilities
Viewed 1257 times since Wed, Jul 4, 2012
Allow Use of Discount / Supplier Matrix Entries from Head Office Accounts
Viewed 2504 times since Fri, Jun 8, 2012
Security and User Manager
Viewed 1475 times since Wed, Jul 4, 2012
Order Acknowledgements
Viewed 1139 times since Tue, Jul 3, 2012
Order Utilities
Viewed 1130 times since Tue, Jul 3, 2012
Detail Back-2-Back
Viewed 1692 times since Wed, Jul 4, 2012
Selective Detail Screens on Detail Pick-Mode Order Entry
Viewed 2029 times since Mon, Jun 11, 2012